|
Posted by Roy Schestowitz on February 13, 2006, 12:13 pm
Please log in for more thread options __/ [Bill Marcum] on Monday 13 February 2006 00:37 \__
> On Mon, 13 Feb 2006 02:00:33 +0800, Dan Jacobson
>> How does one tell it is time to replace the battery on the Palm m505
>> or Acer s10 etc.?
When it empties too quickly for the PDA to be good for practical purposes
(this depends on how much you use the PDA and how often you charge it), then
it is time to consider a replacement. It /does/ have a cost, however,
especially if you do not change the battery yourself. That cost can be
higher than the market value of the PDA.
> On Palm devices, you can reset the charging circuit by pressing reset
> while the cradle or charger is connected. If the running time per
> charge has decreased significantly and this reset does not improve it,
> it may be time for a new battery.
Nice trick. I learned something new!
>> Of course one should only purchase recently manufactured lithium
>> batteries and all I need is the proper screwdriver?
>>
> See http://gethightech.com for batteries and disassembly instructions.
> Some handhelds are glued together and you need a hair dryer to soften
> the glue. You might also need to solder the battery.
I would also recommend Peter's Pilot Pages:
http://www.pspilot.de/
I recently used his instructions to open up my Tungsten, but the unit's
internals were too delicate to complete the job. Be careful!
>> I suppose I would first use e.g., pilot-link to take a snapshot of all
>> of memory as it will need to be reloaded.
Yes, copy PDA to desktop, then copy desktop to PDA. Are you not using a front
end like gpilot/jpilot or kpilot?
Hope it helps,
Roy
--
Roy S. Schestowitz | "Free the mind, the source will follow"
http://Schestowitz.com | SuSE Linux | PGP-Key: 0x74572E8E
5:05pm up 27 days 12:06, 13 users, load average: 0.64, 0.72, 0.75
http://iuron.com - Open Source knowledge engine project
| 
XML Sitemap