|
Posted by Todd Bowra [MSFT] on July 13, 2006, 10:10 pm
Please log in for more thread options
Some firewalls will block traffic even when disabled. Have you configured
your firewall following the steps on the below page?
http://www.microsoft.com/windowsxp/mediacenter/extender/setup/firewall/norton.mspx.
If you still encounter this message after making these changes, please post
the contents of your DvcConn.log file.
Regarding your router's firewall - because the PC and Xbox 360 are both on
the LAN side of your router, there's no need to make changes to the firewall
settings on your router (the firewall restricts traffic crossing between the
WAN/ADSL side and your home network).
--
This posting is provided "AS IS" with no warranties, and confers no rights.
> I have tried following all the instructions on the media centre home page,
> with respect to setting up the programs, and I have even enabled ports as
> requested by the xbox, but am having problems getting the
> www.xbox.com/pcsetup instyall prgram to recognise my xbox, it keeps
> complaining that there is a firewall in place even though I have
configured
> the firewall as required.
>
> I am using a zoom adsl wirlesss router, does anyone have any experience of
> this problem.
>
> I have even tried disabling the norton firewall but the install program
> still fails complaining about a firewall, does anyone know hopw to
configure
> the firewall on the zoom adsl router ? or is anyone else having problems
| 
XML Sitemap