|
Posted by Keon Lee on March 18, 2008, 12:21 am
Please log in for more thread options
I thought that it was up to OEM power management setting, not Windows Mobile
general configuration.
OEM could adjust backlight off time for unlock input screen.
You may make it used by S2U2
(http://handheld.softpedia.com/get/System-Utilities/Enhancements/S2U2-52386.shtml)
that application lock/unlock tool with LCDOff setting.
But I couldn't confirm it may resolve your problem.
Thanks,
-Keon
작성했습니다. E9371033-2534-4C66-B72D-6208C5A7EF68@microsoft.com...
> We have a lot of MS smartphones, and we apply a central device lock policy
> (4
> digit PIN after 5 minutes of idle) on them all.
>
> One of our senior managers (why does it always have to be a senior
> manager?)
> complains that they have accessibility issues, because the timeout when
> they
> try to unlock the screen on their device (a Treo 500) is too short for
> them
> to press the buttons. For example, as they type the four digit PIN
> required,
> if they have a gap of longer than about 3 seconds between button presses,
> the
> screen blanks.
>
> Does anyone know if it is possible to extend this timeout from 3 seconds
> to
> say 10 seconds?
>
> Thanks in advance
>
> Eric
| 
XML Sitemap