|
Posted by Thomas Kratz on July 30, 2007, 12:56 pm
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by zentara on July 31, 2007, 8:38 am
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Thomas Kratz on July 31, 2007, 11:24 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by zentara on August 1, 2007, 7:04 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Thomas Kratz on August 1, 2007, 10:58 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
| Similar Threads | Posted | | $# array creation and data rotation | June 1, 2008, 5:28 pm |
| RE to extract infos from a logfile | October 20, 2004, 2:03 am |
| how to find the "yesterday" logfile name? | March 2, 2007, 4:04 am |
| redirecting stdout/stderr to logfile | May 24, 2006, 9:59 pm |
| problems appending an entry to a logfile | October 15, 2006, 2:02 am |
| LWP and threads: anything to look out for? | October 12, 2005, 6:53 am |
| threads | December 10, 2005, 6:56 am |
| Threads | February 24, 2006, 8:47 am |
| Are threads possible in 5.6.1 | April 25, 2006, 8:13 am |
| How to use threads? | June 17, 2006, 8:48 pm |
|
XML Sitemap