|
Posted by Chris De Herrera on February 26, 2006, 11:28 pm
Please log in for more thread options Hi,
No you don't have to turn the firewalls off. Just take a look at
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm item #1. Then
you have the info on how to configure the firewall to allow it to work.
--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com
ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
> Hi
>
> Thanks for the advice, I did as you said and it worked. But does that mean
> I
> have to turn the firewalls off very time I need to synchronize? I use
> Kerio
> and Blackice as firewalls.
>
> Julie
>
> Chris De Herrera wrote:
>>Hi,
>>Did you try disabling the firewall temporarily to identify if it is the
>>problem?
>>
>>>I have recently gotten a ipaq rx1950 and when i try to run the
>>> sunchronization between my computer at it I get the "synchronization
>>[quoted text clipped - 6 lines]
>>> also tried to turn off the virsus protection software but nothing seems
>>> to
>>> work. Does anyone have any suggestions please?
>
> --
> Message posted via PocketPCJunkies.com
> http://www.pocketpcjunkies.com/Uwe/Forums.aspx/pocket-pc-activesync/200602/1
| 
XML Sitemap