|
Posted by Barry Watzman on October 20, 2006, 9:05 am
Please log in for more thread options I've never seen two face plates from drives made by different
manufacturers that were interchangeable. But I have seen face plates in
two different drives made by the same firm that were NOT interchangeable.
"Never" may have been strong, but if it's not absolutely correct, it's
still almost absolutely correct.
[I'm not allowing for "custom" mounting that might involve cutting,
glue, etc. I'm assuming that "proper" mounting and fit are a requirement.]
ric wrote:
> Barry Watzman wrote:
>
>
>>No, it's not possible. It's never possible on drives made by different
>>manufacturers (sony/samsung). Sometimes it's not even possible on
>>different drive models made by the same manufacturer.
>>
>>This is one of the biggest problems in attempting to upgrade a laptop's
>>optical drive. I've been there, and it's a pain in the butt.
>>
>>
>>devphylosoff wrote:
>>
>>>hi
>>>
>>>i have sony dw-d56a
>>>and wanna buy the samsung SN S082D
>>>both are slim type
>>>
>>>my question: is it possible to swap the front panel of driver
>>>from my sony to new driver
>>>because the shapes are a bit different
>>>whether the span of pins is the same, is any standard of pins
>>>distances?
>>>someone told me that may be problem with swap.
>>>
>>>look at photo of my sony:
>>><a href="http://student.if.uj.edu.pl/Slawomir.Lenart/dvr/DSC08304.JPG">
>>><a href="http://student.if.uj.edu.pl/Slawomir.Lenart/dvr/">
>>>
>>>so, whether sundry dvd have unique pins span??
>>>any standard.
>>>hmm, it seems strange...
>>>
>>>please tell me
>>>
>
>
> it *is* possible. just not always. the faceplate will will probably
> clip on, but there's no standard for where the buttons line up which
> means it often doesn't work. chances improved if you stay with the
> same drive manufacturer though.
>
| 
XML Sitemap