Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Geoff Blake
May 5, 2005, 2:40 am
rate this thread
I'm new to all this and I am trying to set up a web sever over a local
network. I currently have two boxes attached via a switch. Box 1 is
configured with windowsXP and the other with Fedora3.
The linux box has Apache installed and appears to be running ok. When I use
IE to access the site I get the response : "Page cannot be displayed" or
"The web page you requested is not available offline" depending what is
entered in the address control.
On the Linux box, if I use the command netstat -atn, this shows a host
192.168.123.10 listening on port 80
In the terminal window on the XP box, (192.168.123.12) when I ping
192.168.13.10 I get a successful response. If I telnet 192.168.123.10 80 I
get "could not open connection to the host on port 80:connect failed"
Does anybody have any suggestions /commands that will help me resolve this.
Also does anyone have a link to a good article recommending a development
set-up that includes the physical configuration as well as development tools
for a first timer.
Re: LAMP on a local network
Geoff Blake wrote:
Not a PHP question.
If it's listening but you can't connect then probably the connections are
being dropped by the firewall. Try running a web browser on the FC3 box
(IIRC RH comes with links as standard which will run in a terminal
Alternatively, you could try (as root):
this will remove all the rules from the firewall.
Obviousl;y you'll want to have a working firewall but this should allow you
to confirm where the problem is.
- » ssh on command line: force using a group size (prime size) of 1024 (and no...
- — The site's Newest Thread. Posted in » Secure Shell Forum