Do you have a question? Post it now! No Registration Necessary. Now with pictures!
July 23, 2006, 3:54 pm
rate this thread
Version 1.43 of Device::Gsm perl extension has been released to CPAN,
and should be available at your local CPAN mirror in a day or two.
1.43 Sun Jul 23 17:40:15 CEST 2006
- Added ability to decode alphabetical sender addresses.
Thanks to Torsten Mueller for reporting the issue.
1.42 Mon May 8 21:16:40 CEST 2006
- Fixed a bug in Device::Gsm::Sms delete() method that invoked
a non-existent Device::Gsm::deleteMessage().
- Implemented read and delete of sms messages from different
storages (ME, SM, ...). Only for PDU format. Thanks to
Jurij Sikorsky for the patch.
1.41 Thu Apr 20 21:52:19 CEST 2006
- === Now Device::Gsm 1.39+ requires at least Device::Modem v1.47 ===
Check out on CPAN before upgrading.
- Some cool fixes for better support of Iridium Satellite phones,
GPRS connections and command/response faster cycle.
Many thanks to Ed Wildgoose.
What it is?
Device::Gsm is perl extension to talk to your gsm mobile phone
via serial port, bluetooth, irda, ... and reads/writes sms messages,
reads battery level, signal, imei(serial) number, makes calls,
and everything is allowed by the GSM AT+C command set.
It works at least on Windows, Linux, Solaris and *BSD systems.
+ working perl installation >= 5.005_03
+ Device::Modem (most recent version is usually required)
+ Device::SerialPort (or Win32::SerialPort for Windows systems)
+ a gsm mobile phone, or oem device, compliant with AT+C GSM
command set (nearly every model is AT+C compliant)
This module installs like all other good old perl modules:
$ perl Makefile.PL
$ make test
$ make install
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
Use it at your own risk, and without ANY warranty!
For any need of commercial support and/or licensing, please contact