Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Need schematic of T|E
January 27, 2005, 7:33 pm
rate this thread
T|E. I've lost the left channel when I put headphones in.
I re-soldered the connection but that did not solve the problem, and I
see now that the pad has been pulled right off the track on the PCB.
I need a PCB layout of the T|E so I can see where this connection goes
to, and put a shorting wire across the PCB. Does anyone know if a layout
is available anywhere?
FT: 250 DK Bongo Stars
Re: Need schematic of T|E
Can't answer directly, but I did the same thing (broke the jack). I found
that by wiggling the headphone plug while it is in the jack, I can find a
spot where the sound works properly. There is also a company (found it on
the web) that will replace the motherboard. Total cost was around $80 IIRC.
I am waiting to see what the next <$200 unit can do. I may buy that instead
of fixing the E.