Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
September 19, 2009, 6:46 am
rate this thread
I'm trying to underclock (Duron 1.4, Syntax V266a motherboard).
Now the issue is, this extremely featureless budget, but otherwise well
performing, board won't let me drop the CPU multiplier below 133 (range
being between 133-165).
If I go ahead with the pencil trick on the cpu anyway will the board
somehow detect this and allow me to drop the multiplier further or will I
be still be stuck with the same multiplier range due to the the
featureless nature of the mobo?
Or indeed is there another trick to allow me to drop the multiplier?
Re: underclocking - Can't change CPU multiplier on board. Advice!
On Sat, 19 Sep 2009 10:46:24 +0000, Keiron wrote:
Oops, clearly its the FSB that won't drop in the bios. There is no
multiplier setting in the bios as far as I can see. Either way and
anyway, I'd like to drop both the multiplier and the FSB.
- » amazing retro FSB overclock on old Prescott P4 3400MHz 478 Pin uPGA
- — Newest thread in » Overclocking PC Components
- » Re: Freedom of the Press -- Encryption Works Document
- — The site's Newest Thread. Posted in » HTML Markup Language