Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- John Doe
February 23, 2010, 9:50 am
rate this thread
From the KVR800D2N5 RAM data sheet.
Single Power Supply of +1.8V (+/- .1V)
Clock Cycle Time (tCK) CL=5... 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC)... 57.5ns (min.)
Refresh to Active/Refresh Command Time (tRFC)... 127.5ns
Row Active Time (tRAS)... 45ns (min.) / 70,000ns (max.)
From the GA-EP45-UD3L motherboard manual.
tRC = tRCD?
tRFC = tRP?
Can you translate the data sheet into those four settings?
Looking around the Internet, I guess they might be something like
(rounded to whole numbers)
I suppose the memory tells the motherboard what the settings are,
but I would like to optimize/tweak the timings just a little.
Which of those four motherboard manual memory settings can usually
be adjusted, and which should be kept the same?
If my questions are boring, please feel free to refer me to some
other source of basic information.
- » Help DDR2 800 Mhz runs at 333 Mhz with Athlon 64 X2
- — Next thread in » Overclocking PC Components
- » amazing retro FSB overclock on old Prescott P4 3400MHz 478 Pin uPGA
- — Newest thread in » Overclocking PC Components