Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Installing temperature probe on S939 CPU
April 22, 2005, 8:02 pm
rate this thread
What is the best way to install a temperature probe on an Athlon 64
3200+ CPU? Do I simply insert the probe between the heatsink and the
processor, or is there another way? I am concerned that this may have
an adverse effect on the contact between the CPU and the heatsink; is
Thanks in advance,
Re: Installing temperature probe on S939 CPU
On 22 Apr 2005 13:02:29 -0700, email@example.com wrote:
Yes, do not do it! Mount a probe on the bottom of a HS as closest as
possible to a CPUs heat spreader & fixit there with a piece of soft
rubber somehow ...
Regards , SPAJKY ®
mail addr. @ my site @ http://www.spajky.vze.com
3rd Ann.: - "Tualatin OC-ed / BX-Slot1 / inaudible setup!"
- » amazing retro FSB overclock on old Prescott P4 3400MHz 478 Pin uPGA
- — Newest thread in » Overclocking PC Components