Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Toshiba Tecra 750CDM LCD replacement?
May 3, 2005, 6:53 am
rate this thread
I have a 750cdm laptop that I need to install a new screen. Problem
is, I'm not sure how to remove it. I'm used to pulling things apart,
as I work as a technician, but with this, I am hesitant to pry on
things, so as not to break anything. Does anyone know how this screen
is replaced on this laptop? I decided I'd better stop, as I have a lot
of screws out, but still no success. Thanks for any info ahead of
Re: Toshiba Tecra 750CDM LCD replacement?
lower corners, usually behind adhesive appliques that cover them (these
sometimes have the product line ("Satellite", "Tecra", etc. imprinted on
them, other times they are "plain"). Remove these carefully by sliding
a pin or X-Acto knife blade under them (a real service shop would rip
them off and replace them with new ones, individuals and indpendent
repair shops don't always have that luxury). On a some models, there
are 4 screws, one in each corner, the ones at the top are often under
Once the screws are out, 2 or 4, the bezel is still held by typically
about 12 to 16 snaps. I wish I could tell you how to get these undone,
it's a learned art that isn't easily communicated in text, and there is
significant risk of breaking a plastic part. Basically, find a starting
place and work your way around the LCD.