Do you have a question? Post it now! No Registration Necessary. Now with pictures!
March 6, 2006, 12:32 am
rate this thread
CPU: 550/600 MHz Intel Celeron
Standard Memory: 64MB (soldered)
Maximum Memory: 192MB
# of Memory Slots: 1
USB Port: Yes
Hard Drive Installation Guide:
Unplug AC power cord, remove internal battery
Turn machine over and remove the three screws in the middle labeled
with a "K" on the bottom of the case. This secures the
Next, remove the cover on top of the keyboard that says Satellite on
the right and has all the functions written on it beginning with ON
light on the left. Easiest way to do this is to open the LCD wide
open and pry gently around this cover. It will pop off. The cover
encases the "ON" button.
Next, remove 4 screws on the top holding down the keyboard. Lift the
board up and out towards the top of the unit to disengage.
Next, two screws hold the hard drive in. Unscrew and pull the hard
drive to the right with the little grab extention that will be
obvious. Make sure the blue (or gray) plastic thin cover that sits
between the right side of the keyboard and the unit gets placed back
to where you see it. It just sits there like insulator between the
keyboard and the machine itself.
Note:Some model may have more screws need to be removed beside the
screws we mentioned in above Installation Guide. Please be careful.