Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
June 2, 2005, 12:11 am
rate this thread
(the 2 pin male connector on the board)
Does anyone know which termial is + or red
One is closer to the RAM expansion, the other faces the rear ports of the
I assume I could use an ohm meter and see what pin is ground but again dont
want to blowing the CMOS IC?
Re: IBM600 CMOS battery polariety MOBO connector missing
I checked my 600E and the wire closest to the RAM expansion is RED. The
battery is heatshrinked and marked Panasonic Lithium CR2025, and the red
wire appears to go to the outside (positive) of the battery. It also has
IBM numbers marked.
Hope this is helps.