Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Fujitsu S6210 LCD / inverter
September 8, 2006, 7:21 am
rate this thread
the top of it cracking the LCD. Sounds fun right? So I replaced the LCD and
the inverter because I noticed the inverter had taken some damage too. When
I hooked everything up I used a flashlight to see if the video was working
and it was. But my problem is I have no backlight. Is there a way to use a
voltmeter to see if the inverter is atleast trying to send power to the
CCFL(backlight) on the LCD. Keep in mind the LCD and inverter are both NEW
and part #'s are the same on the old and new parts. So I doubt it's because
of an incompatibility. I can add photos of the connection to the inverter
and/or LCD if that would help. Any help would be appreciated.