Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
March 4, 2005, 3:48 pm
rate this thread
screen so I sent for service and they replaced the HD. When they
returned it to me they said that they hadn't installed the OS and
that I had to do it with the restoration CDs that came with it. I
downloaded and run "SeaTools Desktop" from Seagate (since it is a
Barracuda) to check if the new HD was ok, and the results where 100%
The problem is that WHEN I USE THE RECOVERY CD TO SET UP THE LAPTOP AT
THE END OF THE INSTALLATION, I GET THE ERROR "THE SYSTEM IS NOT FULLY
INSTALLED. PLEASE RUN SETUP AGAIN", OR GET BLUE SCREEN. The SeaTools
still report that the HD is 100% good (both quick AND full test).
Re: Aspire laptop restoration/recovery fails: "THE SYSTEM IS NOT FULLY INSTALLED. PLEASE RUN SETUP AGAIN"
In first situation its possible that you lost MBR (master boot record) , you
can use "Fdisk /mbr" command from bootable cd/floppy etc. or you will have
to reinstall system. In second it's most like the system loose some of major
look and read this carefully :
- » Using laptop to login to machines with no keyboard/mouse/video
- — Next thread in » Laptop Computers Forum