|
Posted by Gene E. Bloch on June 9, 2008, 8:44 pm
Please log in for more thread options
Thanks, PG.
On 6/08/2008, Papa geo posted this:
> Register the Wups2.dll file in Windows
> To register the Wups2.dll file in Windows, follow these steps:1. Stop the
> Automatic Updates service. To do this, follow these steps:a. Click Start,
> click Run, type cmd, and then click OK.
> b. At the command prompt, type the following command, and then press ENTER:
> net stop wuauserv
>
> 2. Register the Wups2.dll file. To do this, follow these steps:a. At the
> command prompt, type the following command, and then press ENTER:
> regsvr32 %windir%\system32\wups2.dll
> Note For a computer that is running Windows XP Professional x64 Edition,
> type the following command, and then press ENTER:
> regsvr32 %windir%\syswow64\wups2.dll
> b. Click OK on each verification message that you receive.
>
> 3. Start the Automatic Updates service. To do this, type the following
> command at the command prompt, and then press ENTER:
> net start wuauserv
> 4. Exit the command prompt. To do this type exit, and then press ENTER.
>
>
> "Gene E. Bloch" wrote:
>
>> On 5/09/2008, papa bear posted this:
>>> problem solved thanks
>>
>> Papa bear, you keep saying "problem solved", but you don't tell us what
>> worked. Perhaps there are others around with the same problem who would
>> like to know what helped you.
>>
>> --
>> Gene E. Bloch (Gino) letters617blochg3251
>> (replace the numbers by "at" and "dotcom")
>>
>>
>>
--
Gene E. Bloch (Gino) letters617blochg3251
(replace the numbers by "at" and "dotcom")
| 
XML Sitemap