|
Posted by Papa geo on June 8, 2008, 1:21 pm
Please log in for more thread options Register the Wups2.dll file in Windows
To register the Wups2.dll file in Windows, follow these steps:1. Stop the
Automatic Updates service. To do this, follow these steps:a. Click Start,
click Run, type cmd, and then click OK.
b. At the command prompt, type the following command, and then press ENTER:
net stop wuauserv
2. Register the Wups2.dll file. To do this, follow these steps:a. At the
command prompt, type the following command, and then press ENTER:
regsvr32 %windir%\system32\wups2.dll
Note For a computer that is running Windows XP Professional x64 Edition,
type the following command, and then press ENTER:
regsvr32 %windir%\syswow64\wups2.dll
b. Click OK on each verification message that you receive.
3. Start the Automatic Updates service. To do this, type the following
command at the command prompt, and then press ENTER:
net start wuauserv
4. Exit the command prompt. To do this type exit, and then press ENTER.
"Gene E. Bloch" wrote:
> On 5/09/2008, papa bear posted this:
> > problem solved thanks
>
> Papa bear, you keep saying "problem solved", but you don't tell us what
> worked. Perhaps there are others around with the same problem who would
> like to know what helped you.
>
> --
> Gene E. Bloch (Gino) letters617blochg3251
> (replace the numbers by "at" and "dotcom")
>
>
>
| 
XML Sitemap