I/O port-panel (Asus A8N-SLI Premium)

Do you have a question? Post it now! No Registration Necessary.  Now with pictures!

Threaded View
Probably a dumb question, but the instruction manual doesn't cover this!
The panel snaps into place in my case just fine, but I don't know what to do
with the little retention tabs that hold the I/O connectors in place; do I
push connectors through the panel from the inside, or do I bend the tabs
inward from the outside and push the connectors through the holes that way?
Seems to me that pushing the connectors through the holes from the inside
would make for a nice tight fit.  Maybe it's an anal question but I want to
do it right the first time, so I don't have to try and re-straighten them if
I do it wrong.  Know what I mean?


Re: I/O port-panel (Asus A8N-SLI Premium)

If you mean the smaal springy slivers around most ports on the panel,
they're meant to be on the inside, pressing snugly against the connectors on
the mobo. It's for some added RF shieldng..

Most learned on these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate

Quoted text here. Click to load it

Site Timeline