Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Help with Hardrive!!!
March 20, 2005, 10:51 pm
rate this thread
I put together my new system and found that it only recognized 127gigs
of the 200gig drive. I went to the western Digital home page and
followed their directions to change the EnableBigLba value but still no
ASUS P4P800-e Deluxe
Western Digital Caviar 200gig EIDE - ATA 100
1 gig memory
WHat else can I try?
Re: Help with Hardrive!!!
On Sun, 20 Mar 2005 16:40:25 -0500, greg
You shouldn't need the DM util, the board should support
48bit LBA (your > 128GB HDD) without this (overlay?).
You might try a motherboard bios update, see Asus' notes
about bios revisions for that board. Also if you were
changing the "enableBigLba" value, might you need a Windows
Re: Help with Hard Drive!!!
Just a note to the above, the Service Pack must be included in the
installaion/setup disc. If you have an old XP disc w/o SP1 or SP2, you
can Slip-Stream the service pack onto the installation disc.
This is just once resource on how to slip-stream: