Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- why would bios setup not open after.....
November 14, 2007, 4:23 pm
rate this thread
Re: why would bios setup not open after.....
Possibly power, but another thing to try is disconnecting
the port 1-4 drives completely and leaving the port 5-6
drives connected to see if it makes a difference. If it
does, perhaps a bios update would resolve this.
Also if the drives are SATA300 but the board isn't, check
for a jumper to force SATA150 mode.
- » Newest MemTest86, MemTest86+ incompatible with Sandy, Ivy chipsets?
- — Next thread in » Computer Hardware