Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- trouble with IDE on poweredge1400SC
January 16, 2006, 10:55 pm
rate this thread
Re: trouble with IDE on poweredge1400SC
If the install completes, then the main body of the hard disk is OK, so its
a setting somewhere. If XP has only just installed, then the windows
settings must be OK, so that only leaves a problem with the boot sector of
the hard disk or a BIOS setting. The Windows XP install runs from CD, so
check in the BIOS that the computer is set to boot from the CD first, then
the C: drive. Then remove the CD, reboot and try again.