Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Tagan proglem
March 19, 2008, 7:18 pm
rate this thread
strange chars on screen and in Windows screen is unreadable.
When I use another power supplies like Fever 400W and Chieftec 350
everything is OK.
I'm trying in two models of TG400 and on every is the same strange screen.
When I use other graphics cards (but olders) with TG everything is OK.
The Voltages on TG are in norm ATX. I check it by multimeter.
Re: Tagan proglem
I was thinking of AGP cards with an external connector,
since it might be PCIe there wouldn't be an external
connector on a card with low power usage like 8500GT, so it
is beyond a typical skill set to be able to measure this.
It is possible still, by looking at the voltage regulation
stages and probing with the meter positive lead right before
the inductor but if this isn't enough to do it you should
probably just measure at another PSU connector then try
- » Newest MemTest86, MemTest86+ incompatible with Sandy, Ivy chipsets?
- — Next thread in » Computer Hardware