Do you have a question? Post it now! No Registration Necessary. Now with pictures!
June 30, 2008, 11:12 pm
rate this thread
I have a Jetway I31GM3 motherboard with a SATA boot drive and I need
to attach another SATA drive (motherboard has 4 slots) and find the
IOPort address (to have the ability do write directly to the ports).
After I attach the second SATA drive and look in device manager and
look at the 'resources' for the SATA controller, all I see under I/O
range is 0xFA00 - 0xFA0F, same as what I see when I don't have a
second drive connected...dont know if that parts normal or not, but
either way, I need to have the ability to write to the second SATA
drive directly (using allowio tool to bypass windows)...any help would
- » Newest MemTest86, MemTest86+ incompatible with Sandy, Ivy chipsets?
- — Next thread in » Computer Hardware