Do you have a question? Post it now! No Registration Necessary. Now with pictures!
July 25, 2005, 9:49 am
rate this thread
Compaq DL380 with 4 disks, 2 arrays.
SCSI ID's 0,1 with 2,3.
When splitting the RAID prior to installing some updates someone
shut down, then jacked out SCSI 1 & 3 then booted up and chose F2 to
"fail" 1 & 3 then continue.
Well the updates went wrong and now we need to boot from disks in scsi
1 & 3 and we can't. Obviously because they were failed previously. This
really isn't my area at all and I am a bit stuck now.
Anyone got any ideas about how we could get this machine to boot from
those disks? Would be very grateful for any suggestions at all!
- » Wattage date for graphic cards. Would ati radeon all-in-wonder 8500 or 7500 work in 230W P...
- — Next thread in » Computer Hardware