Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- RAID 1 problem
May 7, 2005, 6:17 pm
rate this thread
One of the members in a SATA RAID 1 configuration is no longer working. I
have no option to obtain another disk, but need the data from the other
I thought, since this is a mirror, I could just add the working member of
the raid config onto another system (as an extra hdd) and then read data
Seems not then...
If I would break the mirror in the fasttrack tool, would the data on the
(then to be former) member be lost?
Thanks for your answer.
Re: RAID 1 problem
The reason you create a raid mirror is for security. You have two identical
hard drives. If one fails, you should be able to simply work from the
remaining drive. If you are not able to do this, there may be a problem with
your raid controller, in which case, I would just unplug the good drive and
plug it into a non raid controller