Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Memory upgrade problem
October 2, 2006, 3:04 pm
rate this thread
screen, no CMOS setup, no error beeps, nothing! I removed both modules
and installed only the new one. Same thing. Remove the new module and
installed the old module and the system runs fine.
Mainboard: FIC AU-13
CPU: AMD Duron 1.3 Ghz
Old Module: PC-2100 DDR 128MB SDRAM (single sided)
New Module: PC-2100 DDR 256MB SDRAM (double sided + ECC chip)
The shop I bought the memory from insists that it is good.
Thanks in advance.