Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Ronny Mandal
November 24, 2006, 2:26 pm
rate this thread
I have an issue with this card. Two discs are connected, i.e. one IBM
UltraStar 18,2GB SCSI LVD/SE and one Quantum Atlas V 10KII 18,4gb SCSI
LVD160. Netraid is configured to RAID 0. The cable connecting them are
from 1999, I do not know what type it is (68 pin).
The Atlas-disk will not register unless I configure it to run in
SE-mode, even if IBM is removed. The IBM will register anyway. May it be
a termination issue? The Ibm is terminated (so is the cable), the
Atlas is not.