Do you have a question? Post it now! No Registration Necessary. Now with pictures!
March 27, 2006, 9:03 pm
rate this thread
moved everything into the case & connected everything up ok.
when connecting the front panel connections, the Power LED connection
from the front panel has the normal 2 wire connection , but housed in
a 3 pin connector, so the wires are on the edges of the connector(a
bit like the case speaker connection.
How do I connect to my motherboard as the Power LED is the normal 2
pin connection required.do I take the wires from the 3 pin connector &
just connect separately, or is there some kind of adaptor needed.
Hope this makes sense