Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Fix a broken power supply: How to?
October 14, 2011, 12:06 am
rate this thread
components in a system at once. I will teach you the best way.
1. Look at the back of your computer and find the thumb screws that keep
the side panel attached to your case. Unscrew both of them and slide the
panel off the case so that you can open your computer.
2. Unplug your computer from the wall or you may get electrocuted.
3. Find the 4 screws on the back of the outside of your case, and take
each screw out. Make sure you catch the power supply so it doesn't fall
when you finish unscrewing the screws.
4. Take the supply out of the case and place it on the floor in front of
5. Examine the power supply for any broken insulation on the wires.
6. Stand up, unzip your pants, and urinate all over the power supply. Be
sure to get your piss inside the fans and everything. This is very
important for the next step.
7. Zip your pants back up, and put the power supply back inside the case,
and plug everything in correctly.
8. Blow up a rubber balloon, and rub it on your hair to build up
electricity. Then, place this balloon inside the computer case.
9. Reattach the case's side-panel, and screw the thumb-screws back in.
10. Plug in the power and hit the power button. Congratulations. You've
just created enough man-made lightning to make Nikola Tesla proud.