Do you have a question? Post it now! No Registration Necessary. Now with pictures!
September 7, 2005, 11:04 pm
rate this thread
The existing 168-pin 128Mb stick of memory is marked PC133. If use the
criteria below at...
....will I end up with only those items that are compatible with my system?
(I know from the the mainboard's specs that the max module I can get is
NEWEGG SEARCH CRITERIA
------ ------ --------
Cas Latency: Any
Type: 168-pin SDRAM
Speed: PC 133
The Intel PDF above, appears to say that if I want to use a 512Mb
module, that it must be dual-sided. That option, however, does not
appear to be available (given my other criteria) at NewEgg. Is that right?
Here's what Everest Home says about my Memory Controller:
Memory Controller Properties:
Error Detection Method None
Error Correction None
Supported Memory Interleave 1-Way
Current Memory Interleave 1-Way
Supported Memory Speeds 70ns, 60ns, 50ns
Supported Memory Types DIMM, SDRAM
Supported Memory Voltages 3.3V
Maximum Memory Module Size 512 MB
Memory Slots 3
Here's what it says about the one filled slot:
Memory Module Properties:
Socket Designation J7J1
Speed 50 ns
Installed Size 128 MB
Enabled Size 128 MB
- » Wattage date for graphic cards. Would ati radeon all-in-wonder 8500 or 7500 work in 230W P...
- — Next thread in » Computer Hardware