Asus BIOS Load Default

Do you have a question? Post it now! No Registration Necessary.  Now with pictures!

Threaded View
Hi all,

I have a ASUS K8V-VM. I think that I disable the internal VGA
processor, so,  the system boot, but no video signal.

So, how to enter on bios and reset or load default values ??


Re: Asus BIOS Load Default

Valber wrote:
Quoted text here. Click to load it

Two ways.

THere should be a Clear CMOS jumper near the battery (labels vary, but
jbatt is common). Toggle it to the other position. Try to boot. Then
put it back, try again to boot.

THe other way it to remove the coin-cell battery and have a cup or two
of coffee, then put it back.

In either case, remove the main power first.

Re: Asus BIOS Load Default

Quoted text here. Click to load it

The user manual will contain a description of a safe way to
clear the CMOS with the CLRTC jumper. Usually the first step
is to unplug the computer. That is a safety precaution, as
some older motherboards can be damaged, if +5VSB is still
present on the motherboard, and the jumper is put into the
"clear" position. In the "normal" position there is no problem.


Site Timeline