Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Archimedes' Lever
January 14, 2009, 12:42 pm
Re: Adding missing SATA connectors to motherboard
I am not an expert, but the caps you see are the coupling caps.
The termination resistor would be at the end of the line, not the
I'm not sure what the value of the cap would be, but 100nF is a good
I could be wildly wrong about the value, I know nothing of the SATA
- » Newest MemTest86, MemTest86+ incompatible with Sandy, Ivy chipsets?
- — Next thread in » Computer Hardware