Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
December 13, 2007, 4:52 pm
rate this thread
Re: VIA kt266a ( north bridge ) can use 1gb dimm ?
On Fri, 14 Dec 2007 00:52:17 +0800, TE Chea wrote:
If the manual says 512M max, then I' say that's the largest size you can
use and get use of the full 512M. If you try a 1G dimm it will only give
you half of it, unless the board is really wired for 1GB, and the kt266A
actually supports 1 GB dimms. My advice, forget it, or start searching for
info on the kt266a memory controller and chip pinout. And good luck with
that. Or just try one. It won't damage anything.
Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org
My Tivo Experience http://wesnewell.no-ip.com/tivo.htm
Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm
AMD cpu help http://wesnewell.no-ip.com/cpu.php
- » AMD Athlon-PECM, 1333 MHz (5 x 267) t'bird upgrade or replacement?
- — Next thread in » Overclocking AMD Processors