sempron 2400+

Do you have a question? Post it now! No Registration Necessary.  Now with pictures!

Threaded View

hi i know very little about over clocking i have a gigabyte 7vt600p-rz
Motherboard and a sempron 2400+f.irst of all is this hardware out of date
and what can i do to overclock it?

Re: sempron 2400+

On Fri, 13 Jan 2006 22:54:59 +0000, David Mifsud wrote:

Quoted text here. Click to load it

Socket A is just about dead. Make sure sw1 is set to default (100). In
bios Frequency/Voltage Control section, enable CPU Host Clock control.
Set CPU Host frequency to 200MHz.Now the manual isn't real clear on the
SW1 and this setting. I don't have the board so can't say. Play with it.
If you can get it up to 200Mhz with sw1 in any setting, then you may need
to change the FSB default setting on the CPU to 200 and set sw1 to 100.
You may also need to raise vcore. other options would be to turn it into
an XP-M cpu via some bridge work. Lot's more info here.

Want the ultimate in free OTA SD/HDTV Recorder? Usenet
My server

Site Timeline