Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Cooling question
March 25, 2005, 12:24 pm
rate this thread
I have a sempron 2400 on an asus a7v400-mx mb. I have a cooler master
aero 7 lite cooling the cpu. My question is that with cpu idle running,
my idle is at 42C, load (playing nfsu2 for about 2 hours) it goes up to
52C, but if I stop cpu idle the idle goes to 48C and load goes to the
same 52C, is this normal? I know cpu idle is pretty good, but I didn't
think there would be *that* much of a difference!
I want to get my idle temps lower so I can feel safe running linux
(there's no cpu idle type proggy for it).
Thanks for any advice.
Re: Cooling question
On Fri, 25 Mar 2005 07:24:44 -0500, Chachi wrote:
Sounds ok to me.
Sure there is. With my old via board I used lvcool, with a sis board I
used athcool. I think Athcool also supports the VIA chipset boards.
And then there's FVcool. Don't know anything about it. See the Athlon
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
My server http://wesnewell.no-ip.com/cpu.php
Verizon server http://mysite.verizon.net/res0exft/cpu.htm