Do you have a question? Post it now! No Registration Necessary. Now with pictures!
- Posted on
- Abit KT7 + Athlon XP 1600 Boot up problem
June 20, 2005, 6:48 am
rate this thread
I've some problem with ,y Mobo ABit KT7. When I put Athlon XP 1600 it
runs at 10,5x100 = 1050 Mhz and it is ok, but after few days when I try
to power on the mobo beeps, : 3 long beep, and power down, but if I
press the rest button after few seconds everything is ok and bios boot
correct and system is loading. Are there any solutions for this problem
( rise vcore or something eles or set multiplier at 14x or 15x)?
I'm waiting for any ideas.
MoBo: ABIT KT7 (non A or Raid)
RAM 3x 128 MB
ATI Radeon9200 SE
HDD 20GB Seagate
CPU Athlon XP 1600 running at 10,5x100 work.temp F - 51 C
Re: Abit KT7 + Athlon XP 1600 Boot up problem
On Mon, 20 Jun 2005 08:48:37 +0200, pit wrote:
Not sure what's causing the boot problem, but you can change the
multiplier to whatever you want. I chose 16 with my 1600+. Stilll going
strong today in a 4 .5 year old KT7-Raid (same bios). See link below.
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
My server http://wesnewell.no-ip.com/cpu.php
Verizon server http://mysite.verizon.net/res0exft/cpu.htm