Click here to get back home

Will Vista upgrade work if disk repartitioned?

 HomeNewsGroups | Search | About
 comp.sys.laptops    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
Will Vista upgrade work if disk repartitioned? Dave (from the UK) 05-05-2007
Posted by Dave (from the UK) on May 5, 2007, 4:25 am
Please log in for more thread options
I bought a Sony laptop (SZ4XWN/C) which came with Vista Business. I
repartitioned the disk, installed Debian Linux and had no problems.

I then "upgraded" Vista Business to Vista Ultimate using the Anytime
Upgrade DVD supplied with the laptop. That succeeded in:

1) Stoping the camera working
2) Stoping the audio working
3) Messing up my dual-boot configuration.
4) Getting Sony to say they don't support the upgrade - even though they
include the Anytime Upgrade DVD.

I've since restored the laptop back to factory defaults, which means the
disk is now partitioned differently to when I purchased the upgrade. It
also means it has Vista Business running, not the Ultimate for which I
have purchased the upgrade

If I try the upgrade again (this time I intend loading later drivers
after the upgrade, instead of before), will the product still appear to
be licensed correctly? In other words, if nothing has changed on the
laptop *except* the disk partitioning, will the upgrade be OK, or will I
be fighting $MS to get a new code or something?


--
Dave (from the UK)

Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@althorne.org
Hitting reply will work for a few months only - later set it manually.

http://chessdb.sourceforge.net/ - a Free open-source Chess Database

Posted by Barry Watzman on May 5, 2007, 5:00 pm
Please log in for more thread options
You should be ok. It would be best to record the VSN's of each
partition and restore them, but the PA scheme measures ten parameters,
the partiton VSN's are only one of them, you are allowed to change
between 3 and 6 depending on the exact situation.


Dave (from the UK) wrote:
> I bought a Sony laptop (SZ4XWN/C) which came with Vista Business. I
> repartitioned the disk, installed Debian Linux and had no problems.
>
> I then "upgraded" Vista Business to Vista Ultimate using the Anytime
> Upgrade DVD supplied with the laptop. That succeeded in:
>
> 1) Stoping the camera working
> 2) Stoping the audio working
> 3) Messing up my dual-boot configuration.
> 4) Getting Sony to say they don't support the upgrade - even though they
> include the Anytime Upgrade DVD.
>
> I've since restored the laptop back to factory defaults, which means the
> disk is now partitioned differently to when I purchased the upgrade. It
> also means it has Vista Business running, not the Ultimate for which I
> have purchased the upgrade
>
> If I try the upgrade again (this time I intend loading later drivers
> after the upgrade, instead of before), will the product still appear to
> be licensed correctly? In other words, if nothing has changed on the
> laptop *except* the disk partitioning, will the upgrade be OK, or will I
> be fighting $MS to get a new code or something?
>
>

Posted by Dave (from the UK) on May 5, 2007, 8:24 pm
Please log in for more thread options
Barry Watzman wrote:
> You should be ok. It would be best to record the VSN's of each
> partition and restore them, but the PA scheme measures ten parameters,
> the partiton VSN's are only one of them, you are allowed to change
> between 3 and 6 depending on the exact situation.

Thank you. I think given what you say about being able to change from 3
and 6 parameters, I might not bother to restore the ID. It may be seen
as suspicious by $MS if for example the partition size is measured too.

At the end of the day I am not trying to pirate it - simply use what
I've paid for.


> Dave (from the UK) wrote:
>
>> I bought a Sony laptop (SZ4XWN/C) which came with Vista Business. I
>> repartitioned the disk, installed Debian Linux and had no problems.
>>
>> I then "upgraded" Vista Business to Vista Ultimate using the Anytime
>> Upgrade DVD supplied with the laptop. That succeeded in:
>>
>> 1) Stoping the camera working
>> 2) Stoping the audio working
>> 3) Messing up my dual-boot configuration.
>> 4) Getting Sony to say they don't support the upgrade - even though
>> they include the Anytime Upgrade DVD.
>>
>> I've since restored the laptop back to factory defaults, which means
>> the disk is now partitioned differently to when I purchased the
>> upgrade. It also means it has Vista Business running, not the Ultimate
>> for which I have purchased the upgrade
>>
>> If I try the upgrade again (this time I intend loading later drivers
>> after the upgrade, instead of before), will the product still appear
>> to be licensed correctly? In other words, if nothing has changed on
>> the laptop *except* the disk partitioning, will the upgrade be OK, or
>> will I be fighting $MS to get a new code or something?
>>
>>


--
Dave (from the UK)

Please note my email address changes periodically to avoid spam.
It is always of the form: month-year@althorne.org
Hitting reply will work for a few months only - later set it manually.

http://chessdb.sourceforge.net/ - a Free open-source Chess Database

Posted by Barry Watzman on May 5, 2007, 9:00 pm
Please log in for more thread options
The partition size is not measured. Restoring the VSN is a good idea,
but should not be necessary.


Dave (from the UK) wrote:
> Barry Watzman wrote:
>> You should be ok. It would be best to record the VSN's of each
>> partition and restore them, but the PA scheme measures ten parameters,
>> the partiton VSN's are only one of them, you are allowed to change
>> between 3 and 6 depending on the exact situation.
>
> Thank you. I think given what you say about being able to change from 3
> and 6 parameters, I might not bother to restore the ID. It may be seen
> as suspicious by $MS if for example the partition size is measured too.
>
> At the end of the day I am not trying to pirate it - simply use what
> I've paid for.
>
>
>> Dave (from the UK) wrote:
>>
>>> I bought a Sony laptop (SZ4XWN/C) which came with Vista Business. I
>>> repartitioned the disk, installed Debian Linux and had no problems.
>>>
>>> I then "upgraded" Vista Business to Vista Ultimate using the Anytime
>>> Upgrade DVD supplied with the laptop. That succeeded in:
>>>
>>> 1) Stoping the camera working
>>> 2) Stoping the audio working
>>> 3) Messing up my dual-boot configuration.
>>> 4) Getting Sony to say they don't support the upgrade - even though
>>> they include the Anytime Upgrade DVD.
>>>
>>> I've since restored the laptop back to factory defaults, which means
>>> the disk is now partitioned differently to when I purchased the
>>> upgrade. It also means it has Vista Business running, not the
>>> Ultimate for which I have purchased the upgrade
>>>
>>> If I try the upgrade again (this time I intend loading later drivers
>>> after the upgrade, instead of before), will the product still appear
>>> to be licensed correctly? In other words, if nothing has changed on
>>> the laptop *except* the disk partitioning, will the upgrade be OK, or
>>> will I be fighting $MS to get a new code or something?
>>>
>>>
>
>

Posted by Joseph Fenn on May 5, 2007, 5:57 pm
Please log in for more thread options


On Sat, 5 May 2007, Dave (from the UK) wrote:

> I bought a Sony laptop (SZ4XWN/C) which came with Vista Business. I
> repartitioned the disk, installed Debian Linux and had no problems.
>
> I then "upgraded" Vista Business to Vista Ultimate using the Anytime Upgrade
> DVD supplied with the laptop. That succeeded in:
>
> 1) Stoping the camera working
> 2) Stoping the audio working
> 3) Messing up my dual-boot configuration.
> 4) Getting Sony to say they don't support the upgrade - even though they
> include the Anytime Upgrade DVD.
>
> I've since restored the laptop back to factory defaults, which means the disk
> is now partitioned differently to when I purchased the upgrade. It also means
> it has Vista Business running, not the Ultimate for which I have purchased
> the upgrade
>
> If I try the upgrade again (this time I intend loading later drivers after
> the upgrade, instead of before), will the product still appear to be licensed
> correctly? In other words, if nothing has changed on the laptop *except* the
> disk partitioning, will the upgrade be OK, or will I be fighting $MS to get a
> new code or something?



> Dave (from the UK)

Well not sure about VISTA and beyond, however I had winxp/pro
which I upgraded from WIN98SE and subsequently Partitioned my drive
with no problem. The activated winxp/pro remained activated
after I did this.
Joe


Similar ThreadsPosted
laptop at work, theft protection, and external disk December 22, 2005, 8:56 am
XGA to SXGA+ screen upgrade on HP NX6110 didn't quite work... April 12, 2008, 8:13 pm
Xp Home to Xp Professional Step Upgrade (why wont it work?) November 6, 2004, 11:23 pm
Xp Home to Xp Professional Step Upgrade (why wont it work?) November 6, 2004, 11:28 pm
Xp Home to Xp Professional Step Upgrade (why wont it work?) November 6, 2004, 11:29 pm
Xp Home to Xp Professional Step Upgrade (why wont it work?) November 6, 2004, 11:29 pm
Upgrade disk Satellite Pro p2100 May 8, 2006, 11:46 am
Repair under warranty after upgrade of OS and hard disk June 29, 2008, 3:20 am
HP Vista Upgrade link November 24, 2006, 9:43 am
Hard disk upgrade on Acer Aspire 3000 June 28, 2006, 2:29 pm

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap