|
Posted by whitemilk@gmail.com on November 29, 2007, 6:01 am
Please log in for more thread options
I've just configured a VPN IPSEC tunnel using ANTHAVPN and ASA, the
tunnel goes up but no traffic are routed throught the tunnel.
I checked the policy and I can see my split tunnel rules.
Any ideas? Do you know anything about some similar problems?
Thanks,
M
On 28 Nov, 11:33, moo...@gmail.com wrote:
> I am also trying to connect wm6 device to CISCO device: the ASA. Has
> anyone had any success with this at all?
> I know it should work but it simply doesn't even try to connect.
>
> On Nov 24, 9:29 pm, Steven Munoz
>
> > Thanks JH, but this software support WM6? which version will be used?
>
> > "JH" wrote:
> > > Steven,
> > > Go towww.anthasoft.comandpurchase theirAnthaVPNforWindowsMobile. This
> > > works great. I used to use it on my Treo 700wx.
>
> > > housej55
>
> > > > Hi
>
> > > > In me case, the companyvpnis a IPSEC (no L2TP)vpn, for that I need avpn
> > > > client that use this protocol.
>
> > > > Which othervpnclient do you recommend?
>
> > > > "Steve Riley [MSFT]" wrote:
>
> > > >>WindowsMobile6 supports PPTP and L2TP+IPsec. So long as your CiscoVPN
> > > >> server is configured for either of these, it should work. Both protocols
> > > >> are
> > > >> standards that have been around for a while.
>
> > > >> --
> > > >> Steve Riley
> > > >> steve.ri...@microsoft.com
> > > >>http://blogs.technet.com/steriley
> > > >>http://www.protectyourwindowsnetwork.com
>
> > > >> > Hi guys,
> > > >> > I have a hp Ipaq 510 Voice Messenger withWindowsMobile6.0 Standard.
> > > >> > I'm want to connect to my company network through CiscoVPN, the
> > > >> > built-in
> > > >> >VPNclient support IPSec CiscoVPN? Do you know if exists a CiscoVPN
> > > >> > client
> > > >> > for WM6 standard?
>
> > > >> > Thanks,- Hide quoted text -
>
> > - Show quoted text -
| 
XML Sitemap