|
Posted by Hans Bunse on June 29, 2006, 11:40 am
Please log in for more thread options Hi,
what you could do is "find" a 4.1 EFIGS ROM file plus ROM Crafter software
and flash the ROM file into your m500. ROM Crafter is PC-based with
back-up and restore functions and supports
both USB and RS232 under Windows XP. This info stems from a buddy who is
keepin' a long-eared critter for a pet.
Take care
> Don't know for sure but think I tried to do the same thing my google
> search
> revealed talk of the US version working but it giving the illusion of
> crashing the Palm, but that after a hard reset all was well and you were
> with 4.1. Oh, and also read somewhere that it only works with a Palm
> cradle
> with a serial connector rather than the USB. I bought a serial cradle
> from
> ebay and then never bothered upgrading as I was princiapply seeking to
> install 4.1 in the hope it would stop the frequent screen lock ups.
> Removing the screws from the back of the unit was the biggest leap
> forward
> in curing that problem - it seems to be in part something to do with
> pressure on the screen. The thing will stay clipped together quite
> happily
> without the screws. The other cause of lockups is that the m500's
> processor
> was just too slow
>
>
>> Can anyone help with upgrading my M500 OS please.
>> I have a multi language M500 & cannot find where to upgrade from 4.0 to
>> 4.1.
>> Below is the official line from Palm
>>
>> "This version of the Palm OSŪ Software 4.1 Upgrade for the Palm m500 and
>> m505 handhelds Update is intended for US English handhelds only. It is
>> not
>> compatible with Multi-Language versions of the Palm m500 and m505
>> handhelds"
>>
>> Thanks
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
| 
XML Sitemap