Tungsten E won't power up

comp.sys.handhelds - Discussions about handheld computing - PDAs etc. 

Subject Author Date Tungsten E won't power up Bernd Felsche 01-13-2006

Posted by Bernd Felsche on January 13, 2006, 11:33 am Please log in for more thread options My sister's Tungsten E appears dead. No "power". No display. No sound. Battery appears charged (3.3V). I disconnected the battery for a day and operated the push-buttons to remove residual charge but it still wouldn't respond once the battery was reconnected. Power switch, reset switch and card slot switches tried but not a sausage. An "upgrade" is quite costly and functionally superfluous. Official repair fee is onerous. It's well out of warranty (~2 years old). Any other suggestions? -- /"\ Bernd Felsche - Innovative Reckoning, Perth, Western Australia \ / ASCII ribbon campaign | "Laws do not persuade just because X against HTML mail | they threaten." / \ and postings | Lucius Annaeus Seneca, c. 4BC - 65AD. Similar Threads Posted power fex21 March 7, 2005, 11:48 pm Run an app at power-on EVERY TIME? April 6, 2005, 2:05 am cassiopeia e-100 won't power on November 16, 2005, 5:29 am My ipaq cannot power on January 29, 2006, 8:34 pm Who has a Tungsten W? November 23, 2004, 8:10 am BenQ P50 power connector/hotsync? March 17, 2005, 5:31 am Power supply for a Toshiba E570 March 9, 2006, 8:51 am Palmone Tungsten T5 March 14, 2005, 10:36 am attn: jeffry - genuinely astounding power - let ut - (1/1) March 26, 2007, 3:42 pm palm tungsten E can't see printer March 12, 2005, 7:00 pm