|
Posted by Brad Walton on October 12, 2004, 5:19 pm
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Brad Walton on October 12, 2004, 5:27 pm
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by A. Sinan Unur on October 13, 2004, 2:34 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Brad Walton on October 12, 2004, 7:52 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by A. Sinan Unur on October 13, 2004, 2:53 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
| Similar Threads | Posted | | "RFC": re [un]pack() | September 10, 2004, 12:15 am |
| pack 'C3U*' not same as pack 'C3(xC)*' | June 23, 2005, 7:48 am |
| Need help with pack | October 1, 2005, 11:00 pm |
| pack and unpack ? | January 9, 2005, 11:37 am |
| pack problem? | August 27, 2006, 11:17 pm |
| sprintf or pack | January 30, 2007, 7:33 am |
| pack /unpack issue | November 10, 2005, 7:48 pm |
| pack, unpack and 64-bit values | February 9, 2006, 12:55 pm |
| extracst the first 8 bits with pack | August 22, 2006, 4:08 am |
| perl pack string | March 24, 2008, 4:21 pm |
|
XML Sitemap