|
Posted by Let Us Impress on April 2, 2008, 2:32 pm
Please log in for more thread options I'm having the SAME problem... I change my HP RX 5915 from 12:26pm to
1:26pm... then sync it... it changes back to 12:26... I then downloaded the
patch below... I got a message on the rx5915 screen "the software did not
install" (or something like that) I tried two times... no solution, just
that it did not install! So I reset the device to the correct time, and
sync'ed... and sat there and watched the screen-- and it RESET the time for
an hour behind! I'm STUCK with this thing always re-setting me to an hour
behind!
Any other suggestions?
"Kathleen Anderson" wrote:
> Hi Todd:
> I've got the iPAQ rx3715 and HP has their own Daylight Saving Time Fix:
> https://msmvps.com/blogs/spiderwebwoman/archive/2007/02/27/620801.aspx
>
> --
>
> ~ Kathleen Anderson
> Microsoft MVP - FrontPage
> Spider Web Woman Designs
> Expression Web Resources: http://www.spiderwebwoman.com/xweb/
> FrontPage Resources: http://www.spiderwebwoman.com/resources/
> Please reply to the newsgroup for the benefit of others
>
>
>
>
>
>
> > At 10 Mar 2008 21:18:00 -0700 Erich wrote:
> >> I am running ActiveSync 4.5 on an HP iPAQ rx3715. I haven't had problems
> >> until the time change. I cannot get the times to sync properly. The
> >> handheld remains 1 hour behind. It is affecting my calendar. Items that
> >> were scheduled for a 7am start time are now showing up at 8 am.
> >>
> >> Any ideas of how to resolve this?
> >
> >
> > I assume you haven't patched the device for the new DST start/end dates?
> >
> > Navigate to the following page from your device, download the patch for
> > WM2003 SE (works for most all WM2003 devices) and run it.
> >
> > http://mobile.microsoft.com/en-us/windowsmobile/downloads/dstdownload.aspx>
> >
> >
> > To "activate" it after running it, either soft reset, or go to the clock
> > settings and change your home time zone to anything other than the one it
> > is now, then change it back.
> >
> >
> >
> >
>
>
>
| 
XML Sitemap