|
Posted by jmickevi on July 28, 2006, 10:25 am
Please log in for more thread options
Hello,
I am trying to make a VPN connection from my Treo 700w to my Watchguard
Firebox to access systems on my office network. The Windows Mobile 5.0
PPTP VPN paramaters seem pretty straight forward - just like in Windows
XP.
I can make a Windows XP PPTP VPN connection to Watchguard firebox with
no problems. When I used the same settings for the Treo 700w, I can
establish the VPN connection with my Watchguard firebox, but then one
of two things happens when I try to use the tunnel (neither good :-).
Either no traffic passes thru the tunnel and the tunnel continues to
stay up, or the tunnel disconnects as soon as I try to use it.
I have seen a couple of postings elsewhere on the internet describing
this problem, but have never found a solution.
Anybody have any ideas?
Thanks!
John.
| 
XML Sitemap