|
Posted by Yaroslav Goncharov on September 6, 2006, 4:57 am
Please log in for more thread options
> Before establishing connections to the target Destination, I should
> specify
> some APN leading to some destination.
Could you expain where you need to specify APN?
If you want to monitor traffic in the way commercial third party software
does, use RAS.
--
Yaroslav Goncharov
Pocket PC Developer Network coordinator, http://pocketpcdn.com
Spb Software House, http://spbsoftwarehouse.com
> Dear All,
>
> I met some problem about monitoring the GPRS codnnection on a smart
> device,
> such as SmartPhone 2003.
>
> As I know, there are 4 default Destionations in a SmartPhone:Internet,
> Work,
> Wap, Secure Wap.
> When I use ConnMgrEstablishConnection API, I can only sepcified one of
> this
> four destinations to connect.
>
> Before establishing connections to the target Destination, I should
> specify
> some APN leading to some destination.
>
>
> When all the above are done, the connestion is established. but at this
> point my software is only about to monitor the connection at the
> "Desination" level, never deep to "APN" level.
>
> I'd ever use a software "SPB GPRS Monitor", with this software, it can
> monitor the GPRS connection down to "APN" level. that means, what I want
> is
> can be done.
>
> so, someone pls help me out here. thx a lot!
>
>
> All@n Z.Tang
>
>
>
| 
XML Sitemap