|
Posted by George Monappallil on January 20, 2005, 9:54 pm
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by xhoster on January 21, 2005, 3:14 am
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by l v on January 20, 2005, 9:46 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Dave Weaver on January 21, 2005, 10:34 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by George Monappallil on January 21, 2005, 6:14 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
| Similar Threads | Posted | | Known issues with Perl under Cygwin? | August 26, 2005, 6:43 pm |
| having issues using awk and/or converting to perl | January 9, 2006, 6:21 am |
| Active State Perl PPM version 4.00 issues | November 22, 2006, 2:13 pm |
| 2 issues with "tie" | August 26, 2007, 9:32 pm |
| DBI Performance Issues | August 25, 2006, 10:33 am |
| Memory issues | March 29, 2008, 8:45 am |
| Perldoc security issues | September 12, 2005, 2:16 pm |
| taint issues in utf8_heavy.pl | August 23, 2006, 7:43 am |
| Inline replacement issues | October 18, 2006, 3:53 pm |
| Issues to post reply | June 1, 2007, 1:26 am |
|
XML Sitemap