|
Posted by MedRxman on December 16, 2007, 10:57 am
Please log in for more thread options Thank you,
I now see what happened in my case. I had to restore the ROM image of my old
IPAQ due to some unresolveable issues and as a result when I connected to
establish a partnership, my old partnership was still there consequently
creating a situation whereby a partnership already existed. Solved the issue
by deleting all partnerships and giving my device a new name.
BL
> Hi,
>
> Yes, you will need to set it up one at a time. For more information -
> http://www.pocketpcfaq.com/raj/MultiplePartnership.html
>
> --
> Regards,
> Raj Pillai
> Microsoft MVP - Mobile Devices
> http://www.pocketpcfaq.com/raj
>
>
>
> Using Activsync 3.8
> want to sync 1 PDA and 2 computers.
>
> Would this be correct:
>
> On connection to first PC set up to partnership to sync with one computer.
>
> On second PC set up partnership to sync with 2 computers.
>
> The directions on ActiveSync help are a bit misleading to me:(see below)
>
===========================================================================================================
> This I understand:
> o ensure that synchronization functions properly, the two desktop
> computers must be configured with the same synchronization settings. For
> example, you should synchronize the same types of information using the
> same synchronization settings on both desktop computers. Both desktop
> computers should also use the same personal information manager (PIM).
>
> Note: No.1 means to me to do as I have suggested since I do not yet have a
> partnership already with another computer.
>
> 1 If your device already has a partnership with a desktop computer, go to
> step 4. Otherwise, connect your mobile device to the first desktop
> computer using a cable or infrared connection. The New Partnership wizard
> will start automatically.
> 2 Follow the directions on the screen.
> 3 After you have set up a partnership and synchronization is complete,
> disconnect your device from the first computer.
> 4 Connect your device to the second desktop computer using a cable or
> infrared connection. The New Partnership wizard will start.
>
> 5 Follow the directions on the screen.
> 6 In the Select Number of Partnerships dialog box, select No, I want to
> synchronize with two computers.
> 7 Follow the directions on the screen.
| 
XML Sitemap