|
Posted by Barry Watzman on May 2, 2009, 11:23 pm
Please log in for more thread options Nothing specific, but find out how to remove the keyboard and look for
screws under it.
bobmct wrote:
show/hide quoted text
> I am attempting to disassemble the above referenced laptop in order to
> gain access to the power jack. I have all the screws that I can see
> out, all the access panels removed, all the plug-in cards removed and
> I still cannot get the bottom plastic housing to snap loose. I can
> pull it down around the entire circumference but it is not free (or
> even generally loose).
>
> I was wondering if any of you readers may be somewhat familiar with
> this series to hopefully identify any tricks that I may be missing to
> release the bottom case on this unit?
>
> I will keep trying and looking further but I thought I would post here
> in the hopes that 1) someone would provide the solution that I am
> missing and 2) that just after I post this I will figure it out!!!
>
> Thanks all - B
| 
XML Sitemap
> gain access to the power jack. I have all the screws that I can see
> out, all the access panels removed, all the plug-in cards removed and
> I still cannot get the bottom plastic housing to snap loose. I can
> pull it down around the entire circumference but it is not free (or
> even generally loose).
>
> I was wondering if any of you readers may be somewhat familiar with
> this series to hopefully identify any tricks that I may be missing to
> release the bottom case on this unit?
>
> I will keep trying and looking further but I thought I would post here
> in the hopes that 1) someone would provide the solution that I am
> missing and 2) that just after I post this I will figure it out!!!
>
> Thanks all - B