|
Posted by JW on August 29, 2006, 6:16 pm
Please log in for more thread options
You can configure for S-Video input if you have an MCE ir receiver OR for
your DVB-Tuners but not both since they use different EPGs. Currently the
only location where you can have two EPGs it the North America where you can
have 1 or 2 NTSC tuners and 1 or 2 ATSC tuners. In this case the EPG for
the ATSC OTA channels is added to the end of the NTSC EPG and start at
channel 1000.
>I have been running 2 usb DVB-T tuners without issue for several months but
> now I have had sky installed and purchased a WINTV HVR1100 just for the
> S-VIDEO input.
>
> The problem is when i got to settings>tv>setup tv signal, MCE just says i
> am
> using antenna and gives me no options to set up a set top box.
> I have the MCE IR receiver hooked up with the blaster attached and the
> S-VIDEO cable hooked up to my STB, i have also verified that WINTV2000
> actually picks up the signal.
>
> Im at the end of my tether with this, i have posted on the Hauppauge
> forums
> but no one has replied.
>
> Hope someone has the answer.
>
> MY SPECS:-
> AMD 64 3200
> ASUS K8V-DELUXE
> GEFORCE 6800
> 1GB RAM
> 2 x MAXTOR DiamondMax 10 200GB
> WINTV HVR1100
> MCE2005 - Rollup 2
> Nvidia purevideo decoder
| 
XML Sitemap